DELTA DORE TYBOX User Manual

TYBOX
Daily/weekly programmable thermostat
User guide
TYBOX
Delta Dore hereby declares that the equipment complies
with the essential requirements and other relevant provi-
sions of the R&TTE Directive 2004/108/CE
(Electromagnetic Compatibility) and 2006/95/EC
(Low Voltage safety).
The EC declaration of conformity for this equipment is
available, on request, from:
"Technical information" department
DELTA DORE - Bonnemain - 35270 Combourg (France)
E-mail : info.techniques@deltadore.com
Because of changes in standards and equipment, the characteristics given in the text
and the illustrations of this document are not binding unless confirmed by our services.
• Carefully read these instructions prior to installation.
• Do not attempt to repair the unit yourself;
after-sales service is available.
1. Presentation
This thermostat lets you program your heating system
to Comfort or Setback mode.
Modification
buttons
Selector dial
position
Selector
dial
Shutdown mode Continuous mode
Absence mode Time setting
Timer mode Programming
Automatic mode
Set-point temperature
adjustment
4. Timer mode
This mode is used to choose a set-point temperature for
a given amount of time.
Turn the selector dial to .
Adjustment of the duration from 15
minutes to 72 hours (in increments
of 15 minutes)
Confirm
Adjustment of the set-point
temperature (from 5 to 30°C)
Confirm
To make changes to the
Return to AUTO mode
current mode, press OK
at the end of the
once more. in corso, premete
countdown
nuovamente sul tasto OK.
To cancel the current timer
mode,turn the selector dial.
2. Automatic mode
Turn the selector dial to AUTO.
Your thermostat will function according to the program.
Time Current mode
Current day
Room
temperature
Current day
programming
Display in automatic mode
NOTE:
According to the configuration during installation,
your unit will continuously display the set-point
temperature or the temperature of the room.
To change these settings, refer to the installation
section of these instructions, or contact our customer
service department or your installer.
5. Continuous mode
This mode is used to choose a set-point temperature
that remains constant.
Turn the selector dial to .
Choice of set-point
temperature (from 5 to
30°C)
Set-point
temperature
Confirm
Change of the
set-point temperature
To exit this mode, turn the selector dial.
3. Override
In automatic mode, override is used to go from
Comfort to Setback mode (or conversely) until
the next program change.
Example: it is 15:30 and you would like to switch to
Comfort mode before the set time (17:00).
0h 6h 8h 15h30
Override
Current day programming
Press the override
button.
Information
button
Override
currently
active
To cancel the current override,
press the button once more.
6. Absence mode
This mode lets you place your home under
FrostProtection if you need to leave for several days.
Turn the selector dial to .
Adjustment of the number of days
(1 to 365)
Example: for a departure on 1 March
and a return on 16 March, program 15
days of absence. Automatic operation
will resume on 16 Marchat midnight.
Confirm
Adjustment of the set-point
temperature (from 5 to 15°C)
Confirm and start the
calendar countdown.
To make changes to the current
mode, press OK once more.
To cancel the current timer mode,
turn the selector dial.
17h 23h 0h
At 17:00, the program will
return to its usual program.
Return to AUTO mode
at the end of the
countdown