Step 1
Connect the Sensor Cable III (24) from the Stabilizer (2) to the Sensor Cable II (23) from the
Right Handlebar Support (25R) and then attach the Right and Left Handlebar Supports (25R, 25L)
to the Stabilizer (2) with six M8x16 Bolts (68) and M8 Spring Washers (67).
Step 2
Attach the Handlebar (26) with Computer (41) onto the Right and Left Handlebar Supports
(25R, 25L) with four M8x50mm Bolts (82) and two Plastic Covers for Handlebar (28). Connect the
Sensor Cable I (22) from the Handlebar (26) to the Sensor Cable II (23) from the Right Handlebar
Support (25R).
Step 3
Insert two 30x60 End Caps (32) into the Right and Left Handlebar Supports (25R, 25L). Finally,
install the Safety Tether Key (42) onto the Computer (41).
8
25R
23
24
67
67
68
2
28
41
82
26
25L
25R
3
32
25L
42
25R
1
68
2
22
23
32