Table of Contents
Advertisement
9375 Starting Watts / 7500 Rated Watts
Electric Start
PORTABLE GENERATOR
SAVE THESE INSTRUCTIONS
Important Safety Instructions
are included in this manual.
OWNER'S MANUAL & OPERATING INSTRUCTIONS
MODEL NUMBER
41430
MADE IN CHINA
REV 41430-20130527
10006 Santa Fe Springs Road
Santa Fe Springs CA 90670
USA / 1-877-338-0999
www.championpowerequipment.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Champion 41430
Summary of Contents for Champion 41430
-
Page 1: Electric Start
9375 Starting Watts / 7500 Rated Watts Electric Start PORTABLE GENERATOR MODEL NUMBER 41430 10006 Santa Fe Springs Road SAVE THESE INSTRUCTIONS Santa Fe Springs CA 90670 Important Safety Instructions USA / 1-877-338-0999 MADE IN CHINA are included in this manual. REV 41430-20130527 www.championpowerequipment.com... - Page 2 AN IMPORTANT MESSAGE ABOUT TEMPERATURE: Your Champion Power Equipment product is designed and rated for continuous operation at ambient temperatures up to 40°C (104°F). When your product is needed your product may be operated at temperatures ranging from -15°C (5°F) to 50°C (122°F) for short periods.
-
Page 3: Table Of Contents
41430 9375 Starting Watts / 7500 Rated Watts Electric Start PORTABLE GENERATOR TABLE OF CONTENTS Cleaning ...... -
Page 4: Introduction
ENGLISH INTRODUCTION Introduction Accessories Congratulations on your purchase of a Champion Champion Power Equipment manufactures and sells Power Equipment generator. CPE designs and builds accessories designed to help you get the most from your generators to strict specifications. With proper use and purchase. -
Page 5: Manual Conventions
Please call our help line at 1-877-338-0999 situation which, if not avoided, could result in death or serious injury. CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. REV 41430-20130527... -
Page 6: Safety Rules
Inform your electricity provider immediately if you or anyone in your household depends on electrical equipment to live. Inform your electrical provider immediately if a loss of power would cause you or anyone in your household to experience a medical emergency. REV 41430-20130527... - Page 7 – Equipment vibrates excessively Operation of this equipment may create sparks that can start fires around dry vegetation. A spark arrestor may be required. The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements. REV 41430-20130527...
-
Page 8: Controls And Features
Fuel Valve – Used to turn fuel supply on and off to DC to the electric starter and receiver control engine. module. Air Filter – Protects the engine by filtering dust Power Panel – See “Power Panel” section. and debris from the intake air. REV 41430-20130527... -
Page 9: Power Panel
(NEMA 14-50R) – May be used to supply electrical power for the operation of 120 Volt AC, 20 Amp, power for the operation of 120 single phase 60 Hz electrical loads. and/or 240 Volt AC, 50 Amp, single phase 60 Hz electrical loads. REV 41430-20130527... -
Page 10: Parts Included
41430 ENGLISH CONTROLS AND FEATURES Parts Included Your 41430 Gasoline Powered Generator ships with the following parts: Wheel Kit – 10 in. Wheel ...... -
Page 11: Assembly
flange bolt (M6x12) and secure with the nut (M6). 3. Red (+) lead should be connected at factory already, if not, connect red lead with flange bolt (M6x12) and secure with the nut (M6). REV 41430-20130527... -
Page 12: Add Engine Oil
2. Remove oil fill cap/dipstick to add oil. 3. Add 1.16 qt. (1.1 L) of oil (included) and replace oil fill cap/dipstick. DO NOT OVERFILL. 4. Check engine oil level daily and add as needed. REV 41430-20130527... -
Page 13: Add Fuel
We strongly recommend that you consult with a qualified fuel tank. electrician to ensure compliance with local electrical codes. WARNING Pouring fuel too fast through the fuel screen may result in blow back of fuel at the operator while filling. REV 41430-20130527... -
Page 14: Operation
During operation the muffler and exhaust fumes produced will become hot. If adequate cooling and breathing space are not supplied, or if the generator is blocked or contained, temperatures can become extremely heated and may lead to fire. REV 41430-20130527... -
Page 15: Starting The Engine
“ON” position, check that the battery connection is still good. NOTE The supplied 12V 14AH battery does re-charge while the engine is running, but it is also recommended that the battery be fully charged at least once per month. REV 41430-20130527... -
Page 16: Stopping The Engine
4. Allow the engine to stabilize. 5. Plug in and turn on the next item. 6. Allow the engine to stabilize. 7. Repeat steps 5-6 for each additional item. NOTE Never exceed the specified capacity when adding loads to the generator. REV 41430-20130527... -
Page 17: Maintenance And Storage
6. Dispose of used oil at an approved waste 5. Squeeze in a clean, absorbent cloth to remove all management facility. excess oil. 6. Place the filter in the assembly. 7. Reattach the air filter cover and snap in place. REV 41430-20130527... -
Page 18: Spark Arrester
Contact our helpline at 1-877-338-0999 to locate the 3. Remove the spark arrester screen. nearest Champion Power Equipment certified service 4. Carefully remove the carbon deposits from the spark arrester screen with a wire brush. dealer for your generator or engine maintenance needs. -
Page 19: Storage
In this case, the battery must be connected to a standard automotive style battery charger for re-charging before it can be used. REV 41430-20130527... -
Page 20: Specifications
... . . 5.7 gallons (21.5 L) Your Champion Power Equipment product is designed – Gross Weight ... . . -
Page 21: Wiring Diagram
41430 ENGLISH SPECIFICATIONS Wiring Diagram REV 41430-20130527... -
Page 22: Parts Diagram
41430 ENGLISH SPECIFICATIONS Parts Diagram REV 41430-20130527... -
Page 23: Parts List
10In Wheel B057830006002070H Flange Bolt M6×20 TWC117-C27-0200 Garter Spring B B008610106000000H Lock Washer Ø6 TD4010-H59-03016X Frame B000970106000000H Washer Ø6 17962-H59-0001 Connection Tube Assembly 1 B000930006000000H Washer Ø6 17962-H59-0101 Connection Tube Assembly 2 B061700006000060H Flange Nut M6 6114D-B98-0101 Carbon Canister REV 41430-20130527... -
Page 24: Engine Parts Diagram
41430 ENGLISH SPECIFICATIONS Engine Parts Diagram REV 41430-20130527... -
Page 25: Engine Parts List
Washer Ø8×Ø20×0.8 21514-QD03-0000 Recoil Spring T1103008001400400 Oil Seal Ø8×Ø14×4 21545-Z6M-0000 Recoil Starter Cover 24606-MB30-0000 Pin,Shaft 21516-IB84-0000 Starter Handle 82200-E73-0400 Electric Starter B000950006000000B Washer Ø6 8223U-E73-0000 Bolt,Motor B166740106001070B Flange Bolt M6×10 92102-0TM6207EP64 Bearing TM6207E/P64 13215-MB30-0000 Bolt,Connecting Rod 13230-Z6M-0200 Crankshaft REV 41430-20130527... -
Page 26: Troubleshooting
Review load and adjust. See “Power Management” Faulty cords or device Check for damaged, bare or frayed wires. Replace defective device For further technical support: Technical Service Mon – Fri 8:30 AM – 5:00 PM (PST/PDT) Toll Free: 1-877-338-0999 tech@championpowerequipment.com REV 41430-20130527... -
Page 27: Warranty
Warranty Qualifications Other Exclusions Champion Power Equipment (CPE) will register this This warranty excludes: warranty upon receipt of your Warranty Registration Card – Cosmetic defects such as paint, decals, etc. - Page 28 The United States Environment Protection Agency (U.S. EPA.) and the California Air Resources Board (CARB) Emission Control System Warranty Your Champion Power Equipment (CPE) engine complies with both the U.S. EPA and state of California Air Resources Board (CARB) emission regulations.
- Page 29 EMISSION CONTROL SYSTEM WARRANTY The following are specific provisions relative to your Emission Control System (ECS) Warranty Coverage. 1. APPLICABILITY: This warranty shall apply to 1995 and later model year California small off-road engines (for other states, 1997 and later model year engines). The ECS Warranty Period shall begin on the date the new engine or equipment is delivered to its original, end-use purchaser, and shall continue for 24 consecutive months thereafter.
- Page 30 You must take your CPE engine or the product on which it is installed, along with your warranty registration card or other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized by Champion Power Equipment, Inc. to sell and service that CPE product during his normal business hours.
Need help?
Do you have a question about the 41430 and is the answer not in the manual?
Questions and answers