Pwron After Pwr-Fail; Power Management Setup; Figure 3.6:Power Management Setup Screen (1); Acpi Function - Advantech AIMB-740 Series User Manual

3.6.25 PWRON After PWR-Fail

To setup the status of system after power fail. The "Off" will keep system
power off after power fail, the "On" will boot up the system after fail, and
the "Former-Sts" will return to the status before power fail.

3.7 Power Management Setup

The power management setup controls the single board computer's
"green" features to save power. The following screen shows the manufac-
turer's defaults:
Figure 3.6: Power management setup screen (1)

3.7.1 ACPI function

The choice: "Enabled", "Disabled".

3.7.2 ACPI Suspend Type

The Choice : "S1(POS)", and "S3(STR)". While selecting "S3(STR)", the
"Run VGABIOS if S3 Resume" and "Resume on USB from S3" will be
active for selection.

3.7.3 Power Management

This category allows you to select the type (or degree) of power saving
and is directly related to the following modes:
1. HDD Power Down
2. Suspend Mode
AIMB-740/741 User's Manual 40