Download Print this page

HP 5500 EI Series Installation Manual: Mounting The Switch On A Workbench; Grounding The Switch

Hide thumbs

Advertisement

Figure 9 Attaching the front brackets to the rack
(1) Load-bearing screw
(3) Front panel
(5) Front mounting bracket

Mounting the switch on a workbench

1.
Verify that the workbench is sturdy and well grounded.
2.
Place the switch with bottom up, and clean the round holes in the chassis bottom with dry cloth.
3.
Attach the rubber feet to the four round holes in the chassis bottom.
4.
Place the switch with upside up on the workbench.
IMPORTANT:
Ensure good ventilation and 10 cm (3.9 in) of clearance around the chassis for heat dissipation.
Avoid placing heavy objects on the switch.

Grounding the switch

(2) Rear mounting bracket
(4) Screw used to attach front mounting brackets to front
brackets
(6) Front square-holed post
12

Advertisement

This manual also for:

5500 si series

Comments to this Manuals

Symbols: 0
Latest comments: