Environmental Specifications; Power Specifications; Power Input Types; Ac Input Voltage Specifications - HP 5500 EI Series Installation Manual

NOTE:
On an HP 5500-24G-SFP EI (2 slots) or 5500-24G-SFP EI TAA (2 slots) switch, the last eight SFP ports
•
and the eight 10/100/1000Base-T Ethernet ports are copper/fiber combo ports in pairs, as shown
in Table
automatically shuts down.
On any other 5500 EI or 5500 SI switch, the last four 10/100/1000Base-T Ethernet ports and the four
•
SFP ports are copper/fiber combo ports in pairs, as shown in
interfaces. When one port in a pair is activated, the other port automatically shuts down.

Environmental specifications

Chassis
All chassis

Power specifications

Power input types

Chassis
5500-24G-SFP EI
(2 slots) and
5500-24G-SFP EI
TAA (2 slots)
Other 5500 EI and
5500 SI switches
The RPS can supply power to your switch when the AC power line fails or cannot supply sufficient power.

AC input voltage specifications

Chassis
All chassis
10. They form eight combo interfaces. When one port in a pair is activated, the other port
Operating temperature
0°C to 45°C (32°F to 113°F)
AC-input power
receptacle
N/A
1
Rated voltage range
100 VAC to 240 VAC, 50 Hz or 60
Hz
Table
Relative humidity
10% to 90%, noncondensing
RPS receptacle
N/A
1
Max voltage range
90 VAC to 264 VAC, 47 Hz to 63 Hz
45
10. They form four combo
Power supply slots
2 (For the available power
supplies, see "Hot swappable
power supplies".)
N/A