Table of Contents
Advertisement
(1) Main body
# Platen/ Original Glass
$ Original size indicator lines (Align all
originals to be copied with these lines.)
% Operation panel (Use to carry out copying
operations.)
& Drum unit
Developing unit
5
(Developing unit release lever(Operate when
replacing the developing unit.)
) Toner cartridge
* Front cover (Open when replacing the toner
cartridge, the developing unit or the drum unit.)
+ Drawer (Up to 250 sheets of copy paper can be
loaded in this drawer.)
, Main switch (Turn this switch ON ( | ) in order
to use the copier.)
- Copier moving handles (Lift here when
moving the copier.)
. Width guide
/ Length guide
0 Copy tray (Finished copies are ejected here.)
1 Copy tray extension (Extend when making
large-size copies such as 8 1/2" x 14" size.)
2 Bypass slot (Feed small-size or special copy
paper here.)
3 Slider (Adjust to fit the width of the copy paper
that is inserted into the bypass slot.)
4 Paper feed cover (Open when removing
jammed paper.)
5 Paper feed cover release button
6 Ejection section cover (Open when
removing jammed paper that cannot be removed
from inside the paper feed cover.)
(2) Automatic Document Feeder (ADF)*
7 Original table (Set originals to be copied here.
A maximum of 20 originals can be set at one
time.)
8 Original insert guides (Adjust to match the
width of the originals to be copied.)
9 Upper cover (Originals that have been copied
are ejected and stacked here.)
: ADF cover (Open if an original jams in the
original feed section.)
; ADF handle (Use this handle when opening
the DF.)
* C145 only.
** C140 shown with platen cover.
7
Advertisement
Table of Contents
