Vlan Setting Example - Planet FSD-804PS User Manual

4.5.3 VLAN setting example:

4.5.3.1 Two separate 802.1Q VLAN
The diagram shows how the switch handle Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and VLAN
Group 3 are separated VLAN. Each VLAN isolate network traffic so only members of the VLAN receive traffic from the
same VLAN members. The screen in
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario described as follow:
Untagged packet entering VALN 2
While [PC-1] transmit an untagged packet enters Port-1, the switch will tag it with a VLAN Tag=2. [PC-2] and
1.
[PC-3] will received the packet through Port-2 and Port-3.
[PC-4],[PC-5] and [PC-6] received no packet.
2.
While the packet leaves Port-2, it will be stripped away it tag becoming an untagged packet.
3.
While the packet leaves Port-3, it will keep as a tagged packet with VLAN Tag=2.
4.
Tagged packet entering VLAN 2
While [PC-3] transmit a tagged packet with VLAN Tag=2 enters Port-3, [PC-1] and [PC-2] will received the
5.
packet through Port-1 and Port-2.
While the packet leaves Port-1 and Port-2, it will be stripped away it tag becoming an untagged packet.
6.
Figure 4-20 appears and
Figure 4-27 two separate VLAN diagram
VID Untagged Members
1 Port-7~Port-8
2 Port-1,Port-2
3 Port-4,Port-5
Table 4-4 VLAN and Port Configuration
Table 4-4 describes the port configuration of switch.
Tagged Members
User's Manual of FSD-804PS
N/A
Port-3
Port-6
- 43 -