Product Application - Planet FSD-804PS User Manual

8-port 10/100mbps with 4-port poe web smart ethernet switch

Hide thumbs Also See for FSD-804PS:

Table of Contents

2.6 Product Application

2.6.1 Connecting end node or Switch

Place the FSD-804PS on a smooth surface or fasten the mounting brackets purchased separately with the pro-

vided screws in a standard 19" rack.

Connect the power cord to the power inlet socket of FSD-804PS and the other end into the local power source

outlet. When the Switch receives power, the Power LED should remain solid Green.

Connect other switch or PC to one port of the FSD-804PS using Category 3/4/5 UTP/STP cabling.

Connect another switch or PC to the other port of FSD-804PS by following the same process as described in Step

Cable distance for Switch

The cable distance between the FSD-804PS and PC should not exceed 100 meter for UTP/STP

cable.

Make sure the wiring is correct

It can be used Category 3/4/5 cable in 10 Mbps operation. To reliably operate your network at

100Mbps, you must use an Unshielded Twisted-Pair (UTP) Category 5 cable, or better Data Grade

cabling. While a Category 3 or 4 cables may initially seem to work, it will soon cause data

Figure 2-7 End node or Switch connection

User's Manual of FSD-804PS

loss.

- 14 -

Table of Contents