Port Security - Planet FSD-804PS User Manual

Object Description
Indicate port 1 to port 8.
Port
The state of the link, indicating a valid link partner device. "Up" means a device is successful
Link
connected to the port. "Down" means no device is connected.
Display the 10Mbps or 100Mbps speed state of each port on FSD-804PS.
Speed
Display half or full duplex mode of each port on FSD-804PS.
Duplex
Display the flow control Disable or Enable state of each port on FSD-804PS.
Flow Control

4.4.3 Port Security

The Layer 2 MAC address learning function can be per-port disable for security management purposes. When the port is in
security mode, the port will be "locked" without permission of address learning.
1. Port Security enabled port will record the first receiving packet's source MAC address as a "Se-
curity MAC address ".
2. A security port only allows that packet which has the "Security MAC address" to active on.
Figure 4-21 Port Status Web Page screen
Table 4-3 Descriptions of the Port Status screen Objects
Figure 4-22 Port Security screen
User's Manual of FSD-804PS
- 32 -