Cannot Print Properly Through Wireless Communication - Canon Selphy DS810 Photo Printing Manual

Troubleshooting
Cannot Print Properly through Wireless Communication
Possible Cause
!TryThis
The infrared Place the printer at a distance of 7.9 inch/20 em from the mobile
communication distance phone or the PDA.
or the Infrared Port angle Ensure that the Infrared Ports are at a proper angle and there are
is incorrect no obstacles between them. Retry printing.
The allowable distance and angle for infrared communication
depend on the functions of the mobile phone or the PDA in addition
to environmental conditions.
See "Performing Infrared Communication" on page 53.
Your mobile phone or Use models equipped with an IrDA port and support image data
PDA is not able to make a transmission via infrared communication.
suitable connection (For
Infrared Communication)
The mobile phone or the Place the mobile phone or the PDA within 33 feet (10m) of the
PDA is too far away from printer when attempting to print via a wireless communication.
the printer (For
Bluetooth
communication)
The printer is installed in You can establish a connection between a mobile phone or a PDA
an incorrect location (For and the printer up to a distance of approximately.33 feet/10m for
Bluetooth Bluetooth communication, however the following conditions may
communication) affect both your ability to establish a connection and the
connection speed:
• Obstructions or electric devices placed between the printer and
your mobile phone or PDA
• Locations where magnetic fields, static electricity, or radio wave
interference are present
• The sensitivity and antenna efficiency of your mobile phone or
PDA
Try changing the location of the printer or moving the mobile phone
or the PDA closer to the printer.
The device you are using The printer cannot connect to devices that use a different standard
is compatible with a (profile) for printing, even if they are Btuetooth compliant. Refer to
different standard (For the user's manual of your mobile phone or PDA to see which
Bluetooth
profiles it is compatible with.
communication)
You have not selected You can confirm the printer name at Device name in the Bluetooth
the correct printer at settings menu. Select the corresponding printer name at your
your mobile phone or mobile phone or PDA.
PDA (For Bluetooth
communication)
W
Note
This printer cannot print data from a PC via Btuetooth communication.