Preparation When Using the Printer
• Loading the Print Media
W
Note
Refer to "Media Types for Card Direct Printing" on page 23.
1
Turn on the printer.
(1) Press the POWER button.
(2) Open the Paper Support.
2
Flatten the four corners of the paper before loading it.
W
Note
If
paper is curled, gently bend the corners in the opposite direction until the paper
becomes completely flat. See "Curled paper used" on page 80.
3
Prepare to load paper.
(1) Slide the Cover Open Switch toward the right to open the Cover.
(2) Ensure that the Paper Thickness Lever is set to
the right.
W
Note
Set the Paper Thickness Lever on the left, on Iy if
ink smudges or the printed surface is stained.
(3) Close the Cover.
21