Printing Photographs Directly From A Canon Bubble Jet Direct Compatible Digital Camera - Canon Selphy DS810 Photo Printing Manual

Printing Photographs Directly from a Digital Camera
Printing Photographs Directly from a
Canon Bubble Jet Direct Compatible Digital Camera
The following is a list of media types that can be set on a Canon Bubble Jet Direct
compatible digital camera or digital video camera (PictBridge incompatible) along
with their limitations when connected to this printer.
• Media Types for Digital Camera
When you connect a digital camera, you can use the following media:
Digital Camera Setting
I
Media Type
Card #1
Photo Paper Pro 4 11 x6 11 j101.6 x 152.4 mm
Card #2
Photo Paper Plus Glossy 4"x6 11 j101.6
x
152.4 mm
Photo Paper Plus Semi-gloss
4
11
x6" j101.6
x
152.4 mm
Glossy Photo Paper 4 11 x6 11 j101.6 x 152.4 mm
Card #3 Not supported
LTR Not supported
A4 Not supported
W
Notes
• For the digital camera operation method and troubleshooting, refer to your digital
camera's manual.
For print error messages, see "Cannot Print Properly from the Digital Camera" on
page 81.
• By operating the digital camera, you can make the following prints:
- You can make a standard print from the photo displayed in the single display
mode or in the index display mode.
- You can print specified numbers of photos, or make an index print by editing the
DPOF.
- For the images taken with an Exif Print compatible digital camera, the ExifPrint
function can be used.
- If date printing is set from the digital camera, the date when the photograph was
taken is to be printed (excluding the index print).
- Photos will be scaled automatically according to the image size set on the digital
camera and the size of the media set on the printer.
• The digital camera does not support the following functions:
- Print quality setting
- Printer maintenance
• Index printing can only be specified for images that were taken with a camera
compatible with the Design rule for Camera File system (Exif2.21 compliant).
50