Cannot Print Properly Through Wireless Communication; Cause; Action - Canon PIXMA mini260 Photo Printing Manual

Camera Error Message Try This
Hardware Error The optional battery has running short. Follow the procedure
below.
(1) Turn the Printer off.
(2) Connect the supplied AC adapter or attach the charged
battery.
(3) Turn the Printer on.
The ink tank error has occurred.
Replace the ink tank. See "Replacing an Ink Tank" on page 47.
Printer error An error requiring servicing might have occurred (POWER lamp
and Alarm lamps flash alternately).
Disconnect the cable between the printer and the camera, turn
off the printer, and unplug the power cord of the printer from the
power supply. After a while, plug the power cord of the printer
back in, turn on the printer, and then reconnect the camera to the
printer.
If the same error occurs, contact a Canon service representative.
*1
To resume printing, you can press the OK button on the printer instead of selecting Continue.
Cannot Print Properly through Wireless
Communication
Cause Action
Printer placement is When printing through infrared communication, confirm that the
inadequate. IrDA ports on the printer and the mobile phone are placed face to
face with each other at a proper angle and distance, and that
there is nothing blocking them. Then, retry printing.
Operational distance and angle vary depending on the
specifications of your mobile phone and your operating
environment, but generally place the printer within around 8
inches / 20 cm from the mobile phone in a position that enables
proper communication.
During infrared communication, During sending, be careful not to interrupt infrared
infrared rays were blocked. communication with the printer. If it is interrupted, send the data
from the mobile phone or the PDA again.
The conditions to print properly The infrared communication function of the printer is only
through the infrared
compatible with mobile phones with IrDA compliant infrared
communication are not met. communication ports. Printing through infrared communication
cannot be performed by any other types of mobile phones.
See "Printing Photographs from a Wireless Communication
Device" on page 36.
The mobile phone or the PDA is Place the mobile phone or the PDA within 33 feet (10m) of the
too far away from the printer
printer when attempting to print via a wireless communication.
(For Bluetooth communication).
Troubleshooting
71