Cannot Install The Printer Driver - Canon Selphy DS810 Photo Printing Manual

Troubleshooting
Cannot Install the Printer Driver
Possible Cause ITry This
IM!mrma
Unable to proceed
beyond the Printer Port
Screen
Other applications
running in the
background
Reinstall the printer driver.
1. Click Cancel.
2. Click Start Over on the Installation Failure screen.
3. Click Back on the displayed screen.
4. Click Exit on the SELPHY 05810 screen, then remove the CD-
ROM.
5. Turn the printer off.
6. Restart the computer.
7. Carefully follow the procedures described and reinstall the driver.
See "Installing the Printer Driver" on page 58.
Other applications opened on your computer can interfere with the
installation routine. Close aU open software applications before
reinstalling the printer driver.
See "Installing the Printer Driver" on page 58.
Installation does not start
Mdtmrma
automatically when the If printer driver installation did not start automatically when you
CD-ROM is inserted into inserted the CD-ROM into the CD-ROM drive:
the drive 1. Click Start and select My Computer.
2. Double-click the CD-ROM icon.
For Windows 2000, open the My Computer window, and then
double-click the CD-ROM icon.
Ik1J'~
Double-click the CD-ROM icon on your desktop to start installation.
If the CD-ROM icon does not appear, there may be a problem with
your CD-ROM. Contact a Canon service representative.
Installation procedure is Install the printer driver again if you did not follow the installation
not followed correctly procedure properly.
See "Installing the Printer Driver" on page 58.
If the installer was forced to terminate due to an error, remove the
CD-ROM from the CD-ROM drive and restart your computer. Reinstall
the printer driver. If this problem persists, contact a Canon service
representative.
Not supported
as
is used
.Uf.rma
Use a computer equipped on which Windows XP or Windows 2000
can operate.
Im,mm;'I
Use a Macintosh series computer equipped with USB interface on
Mac
as x
v.10.2.1 to v.l0.3.x can operate.
83