ASSEMBLY
It is very easy to assemble your scooter as follow the below procedure to your
destination.
1. Installing the Seat (#2)
Insert the Handle support frame (#6) into the seat frame and use the Allan key to
tighten the frame. (See Fig 2, 3)
(Fig 2)
Insert the Footrest frame (#7,8) into the seat frame and use the Allan key to tighten the
frame. (See Fig 4,5)
Footrest
Frame
(Fig 4)
Put the seat (#2) axle into the seat post of
the chassis (See Fig 6).
INSTRUCTION
Handle
support frame
(Fig 6)
(Fig 3)
Allan key
(Fig 5)
7
Allan key