Table of Contents
Advertisement
OPERATION
The power scooter is simple to operate. However we recommend that you read
carefully the following instructions to become familiarized with your new vehicle.
A Word of Caution:
Before you turn the power on, always be aware of the environment that surrounds you
to select your desired speed. For indoor environments we recommend that you select
the slowest speed setting. For outdoor operation of this vehicle we recommend that
you select a speed that is comfortable for you to control it safely.
The following steps are required to operate your vehicle safely with the controller
(See Fig 17) The fig shows the display of TC-1 scooter.
Key
Horn Button
Button functions
1. Remaining Fuel Meter: When your scooter is switched on, the needles on the
meter will move across the scale from the left 'red' sector towards the 'green'
sector, indicating the state of charge in your batteries. As the power is used up in
your batteries the needle will move towards the 'red' sector indicating the state of
charge at that precise time. When the needle is fully over to the right, the
batteries are fully charged. When the needle falls towards the red sector your
batteries are losing power, but you will still have power to spare. When the
needle falls into the red sector your batteries are low in power and need to be
recharged. It is wise to recharge your batteries when the needle enters the red zone
(see Batteries and Battery Charging section of this manual).
(Fig 17)
11
Remaining
Fuel Meter
Power On/Off
Light
Manual Speed
Adjuster
Advertisement
Table of Contents
