Transmitter Programming; Code Systems, Inc. Limited Lifetime Warranty - Code Alarm CA 420 Owner's Manual

TRANSMITTER PROGRAMMING:

If the need arises for programming of additional or replacement transmitters,
simply follow the 4 steps outlined below:
1. Turn the ignition to the ON position
2. Press and release the programming switch 3 times
3. Press and hold, for 3 seconds, the button of the transmitter you wish to
add until the parking light flashes indicating the transmitter has been
learned.
4. Repeat step 3 for each transmitter up to a total of 4.

Code Systems, Inc. Limited Lifetime Warranty

A Code Systems Inc. ("CODE") vehicle comfort, convenience and security system sold to a
retail consumer purchaser by an authorized dealer of CODE and installed by an authorized
dealer of CODE is warranted by CODE to the original retail consumer purchaser to be free
from defects in workmanship and materials for the lifetime of the vehicle in which the
system was originally installed.
A CODE system sold to a retail consumer purchaser by an authorized dealer of CODE and
installed by a party other than an authorized dealer of CODE is warranted by CODE to the
original retail consumer purchaser to be free from defects in workmanship and materials for
the lifetime of the vehicle. Defects caused by or related to the improper installation of the
system are not covered by this or any other warranty.
The duration of this warranty described above applies to all components of the system except for:
switches, indicator lights, transmitter(s) and accessories purchased separately.
Transmitters, exclusive of the transmitter case, are warranted by CODE to the original
retail consumer purchaser to be free from defects in workmanship and materials for the
lifetime of the vehicle in which the system was originally installed.
Switches, indicator lights, and transmitter cases are warranted to the original consumer
purchaser for a period of one (1) year from the date of purchase when the system is
installed by an authorized CODE dealer.
Code system accessories are covered by the warranty supplied with the accessory.
Wiring harnesses altered by installation and transmitter batteries are not covered by this or
any other warranty.