Table of Contents
Advertisement
Quick Links
Remote Vehicle Control System
CA 650
Owner's Manual
Vehicle Security and Remote Start
System with Two Way Confirming
LCD Remote Control
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY
PRECAUTIONS may not apply. Please see your installing dealer for more information.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Code Alarm CA 650
Summary of Contents for Code Alarm CA 650
-
Page 1: Lcd Remote Control
Remote Vehicle Control System CA 650 Owner's Manual Vehicle Security and Remote Start System with Two Way Confirming LCD Remote Control IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY... -
Page 2: Table Of Contents
Table of Contents Using Your Remote Control ... 3 Arming the security system Passive Arming Hidden alarm function Disarming the security system Two stage door unlock* Automatic rearm Valet mode Using Your Remote Control, continued ... 4 Activating trunk release* Activating optional AUX 1* Using the car finder feature Using the personal protection alarm... -
Page 3: Using Your Remote Control
Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the LOCK icon button on the remote control. The system will sound once and the parking lights will flash once, indicating the system is armed. -
Page 4: Using Your Remote Control, Continued
Using Your Remote Control, continued Activating the Trunk Release Feature (Optional) If this feature is enabled on your system, pressing and holding the TRUNK icon button on the remote control for 2 seconds will open the vehicle’s trunk or hatch. Activating Optional AUX 1 (Optional) If this feature is enabled on your system, pressing the LOCK and TRUNK icon buttons on the remote control simultaneously will activate an optional feature. -
Page 5: Using Your Remote Vehicle Starter
Using Your Remote Vehicle Starter Remote Starting Your Vehicle To activate the remote vehicle start function, press and release the STAR button on the remote control two (2) times within 2 seconds. The system will sound, the parking lights will flash 1 time and the system will check the vehicle to ensure it is safe to start. -
Page 6: Using Your Remote Vehicle Starter, Continued
Using Your Remote Vehicle Starter, continued Operating the 2 / 3 Hour Start Up Timer Mode The system has the ability to start the vehicle every 2 or 3 hours with a MAXIMUM of 6 start cycles. This feature is especially useful in cold climates where the only means to keep the engine and engine fluids warm is to periodically start the engine. -
Page 7: Additional 2-Way Lcd Remote Control Functions
Additional 2-Way LCD Remote Control Functions Check Vehicle Status Press and release the TRUNK button and then simultaniously press the LOCK and UNLOCK buttons, the transmitter will respond with one melody sound and display the current status of the vehicle. LCD Remote Control Display Illumination Press and release the TRUNK button on the LCD remote control one time. -
Page 8: Lcd Icons And Their Indications
LCD Remote Control ICON’s LOCK SYSTEM ARMED TRANSMITTING HOOD/TRUNK TRIGGER WARN AWAY TRIGGER IGNITION ON/TRIGGER TIME CONTROL START BATTERY INDICATOR PAGE FROM VEHICLE UNLOCK VALET MODE IN-RANGE INDICATOR DOOR TRIGGER FULL SHOCK TRIGGER ENGINE RUNNING 2 CAR MODE SAVE BATTERY SAVE MODE VIBRATE/SILENT MODE... -
Page 9: Led And Siren/Horn Indications
LED and Siren/Horn Indications LED Display Indications SLOW FLASH FAST FLASH ON (SOLID) 2 FLASH... PAUSE 3 FLASH... PAUSE 4 FLASH... PAUSE 5 FLASH... PAUSE Siren/Horn Indications Chirps Parking Light Flash Indications Flashes ON (SOLID) Function DISARMED ARMED PASSIVE ARMING VALET MODE ZONE 2 TRIGGER, HOOD/TRUNK ZONE 3 TRIGGER, DOOR... -
Page 10: Replacing Remote Control Batteries
Replacing Remote Control Batteries 2-way LCD Remote Control: The AAA alkaline battery inside the 2-way LCD remote control should last approximately 1 year under normal use. When the batteries become weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and the BATTERY icon on the LCD remote control will show. -
Page 11: Emergency Override Procedure
Emergency Override Procedure If your transmitter is lost or disabled, it will be necessary use the emergency override button to turn the security system off. There are two types of emergency override procedures. Check with your installing dealer to find out what has been activated on your system. Standard Emergency Override Procedure Enter the vehicle, the security system will trigger. - Page 12 Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as provided below) should this Product under normal use and conditions, be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGINALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge for parts directly related to repairs of the defect(s).
- Page 13 FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including any interference that may cause undesired operation.
Need help?
Do you have a question about the CA 650 and is the answer not in the manual?
Questions and answers