Vehicle security and keyless entry system (12 pages)
Summary of Contents for Code Alarm CA 420A
Page 1
CA 420A Owners Manual CAUTION! Be certain that the vehicle is outdoors before using this or any re- mote vehicle starting device. A running engine produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs. DO NOT remote start the vehicle if the car is...
Page 2
SAFETY (Red Handled ) CONTROL SWITCH: The control switch allows you to temporarily disable the remote starting function of your Remote Start system. To disable the system, move the red handled control switch to the OFF position. REMOTE STARTING THE VEHICLE: The system WILL NOT start the vehicle if any one of the following situations exist: 1.
Page 3
TRANSMITTER PROGRAMMING: If the need arises for programming of additional or replacement transmitters, simply follow the 4 steps outlined below: 1. Turn the ignition to the ON position. 2. Press and release the programming switch 3 times. 3. Press and hold the button of the transmitter you wish to add for 3 seconds.
Page 4
Code Systems, Inc. Limited Lifetime Warranty Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as provided below) should this Product under normal use and conditions, be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGINALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge for parts directly related to repairs of the defect(s).
Need help?
Do you have a question about the CA 420A and is the answer not in the manual?
Questions and answers