Code Alarm CA 110 Owner's Manual
  1. Manuals
  2. Brands
  3. Code Alarm Manuals
  4. Car Alarm
  5. CA 110
  6. Owner's manual

Code Alarm CA 110 Owner's Manual

Code alarm car security system owner's manual
Hide thumbs Also See for CA 110:
Table of Contents

Advertisement

Quick Links

See also: Owners Manual and Installation Manual
CA 110 Owners Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CA 110 and is the answer not in the manual?

Questions and answers

Related Manuals for Code Alarm CA 110

Summary of Contents for Code Alarm CA 110

  • Page 1 CA 110 Owners Manual...

  • Page 2: Arming The System

    Your System has many features and available options some of which are selected at time of installation. Consult your installing dealer for options that may have been installed and are not listed. ARMING THE SYSTEM: 1. Turn the engine OFF, exit the vehicle, and close all doors, hood and trunk. 2.

  • Page 3: Passive Arming

    PASSIVE ARMING: If the passive arming feature has been selected: Turn the engine OFF, exit the vehicle, and close all doors, hood and trunk. The dash mounted LED will begin to flash rapidly indicating that the 30 second passive arming timer has begun. If the LED does not begin to flash rapidly, then you have left a door, hood, or trunk ajar.

  • Page 4: Disarming The System

    DISARMING THE SYSTEM: As you approach the vehicle, press and release the DISARM button on the keychain transmitter. The parking lights will flash 2 times, the siren will chirp 2 times, and the dash mounted LED will turn off. If you have the optional door lock/unlock circuit installed, the doors will unlock. NOTE: If the passive arming mode was selected at time of installation, the dash mounted LED will start flashing rapidly indicating that the system is rearming.

  • Page 5: Valet Switch

    parking lights will flash 3 times. Enter the vehicle and before turning on the ignition switch, observe the LED flash pattern. If the LED flashes 2 times... pause, 2 times... pause etc., then an intrusion attempt was made to open the hood, trunk, or by an accessory triggering device.

  • Page 6: Eliminating The Normal Arm/Disarm Chirps

    MANUALLY OVERRIDING YOUR SYSTEM: USING THE VALET SWITCH/ MANUAL OVERRIDE Your system can be disarmed without the use of the keychain transmitter. This is necessary, since you will need the ability to operate your vehicle if the transmitter is lost or its battery fails. To by-pass the alarm system; 1.
  • Page 7 ADDITIONAL REMOTE FUNCTION CHANNEL 3 The system has an optional feature, (Channel 3), that can be connected to the Trunk Release. To operate channel 3, press and hold the UNLOCK button of your keychain transmitter for four seconds. ANTI HI-JACK MODE OPERATION 1.
  • Page 8 SYSTEM FUNCTIONS AT A GLANCE ALARM DASH LED INDICATORS RAPID FLASHING SLOW FLASHING ON SOLID 5 FLASH...PAUSE 4 FLASH...PAUSE 3 FLASH...PAUSE 2 FLASH...PAUSE ALARM SIREN CHIRP INDICATION 1 CHIRP* 2 CHIRPS* 3 CHIRPS 4 CHIRPS ALARM PARKING LAMP INDICATIONS 1 FLASH 2 FLASH 3 FLASH ©...
  • Page 9 Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as provided below) should this Product under normal use and conditions, be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGINALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge for parts directly related to repairs of the defect(s).

Table of Contents

Save PDF