Deluxe vehicle security and keyless entry system with 2 way confirming led remote control (12 pages)
Summary of Contents for Code Alarm CA 170
Page 1
Remote Vehicle Control System CA 170 Owner's Manual Vehicle Security System with Two Way Confirming LCD Remote Control IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY...
Table of Contents Using Your Remote Control ... 3 Arming the security system Passive Arming Hidden alarm function Disarming the security system Two stage door unlock* Automatic rearm Valet mode Using Your Remote Control, continued ... 4 Activating trunk release* Activating optional AUX 1* Using the car finder feature Using the personal protection alarm...
Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the LOCK icon button on the remote control. The system will sound once and the parking lights will flash once, indicating the system is armed.
30 seconds. 2 Car Mode It is possible to program your remote transmitter to operate 2 vehicles with a CA 170 installed in each. To active 2 car mode first enter TRANSMITTER FUNCTION MODE by pressing and holding the...
Additional 2-Way LCD Remote Control Functions Check Vehicle Status Press and release the TRUNK button and then simultaneously press the LOCK and UNLOCK buttons, the transmitter will respond with one melody sound and display the current status of the vehicle. LCD Remote Control Display Illumination Press and release the TRUNK button on the LCD remote control one time.
LCD Remote Control ICON’s LOCK SYSTEM ARMED TRANSMITTING HOOD/TRUNK TRIGGER WARN AWAY TRIGGER IGNITION ON/TRIGGER TIME CONTROL START BATTERY INDICATOR PAGE FROM VEHICLE * Some LCD ICON’s may represent features not available on all models. UNLOCK VALET MODE IN-RANGE INDICATOR DOOR TRIGGER FULL SHOCK TRIGGER ENGINE RUNNING...
LED and Siren/Horn Indications LED Display Indications SLOW FLASH FAST FLASH ON (SOLID) 2 FLASH... PAUSE 3 FLASH... PAUSE 4 FLASH... PAUSE 5 FLASH... PAUSE Siren/Horn Indications Chirps Parking Light Flash Indications Flashes Function DISARMED ARMED PASSIVE ARMING VALET MODE ZONE 2 TRIGGER, HOOD/TRUNK ZONE 3 TRIGGER, DOOR ZONE 4 TRIGGER, SHOCK...
Replacing Remote Control Batteries 2-way LCD Remote Control: The AAA alkaline battery inside the 2-way LCD remote control should last approximately 1 year under normal use. When the batteries become weak you will notice the remote control range (the distance from the vehicle the remote control will work) deteriorate and the BATTERY icon on the LCD remote control will show.
Emergency Override Procedure If your transmitter is lost or disabled, it will be necessary use the emergency override button to turn the security system off. There are two types of emergency override procedures. Check with your installing dealer to find out what has been activated on your system. Standard Emergency Override Procedure Enter the vehicle, the security system will trigger.
Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as provided below) should this Product under normal use and conditions, be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGINALLY INSTALLED, such defect(s) will be repaired or replaced (at CODE’s option) without charge for parts directly related to repairs of the defect(s).
Page 12
Code Systems, Inc. Customer Service 1-800-421-3209 WWW.CODE-ALARM.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.