Getting Started; Appearance; Led Indicator; Interface Description - Zte MF29A User Manual

Getting started

The router operates on the HSPA+/HSUPA/HSDPA/WCDMA net-
work and GSM/GPRS/EDGE network and supports voice and data
service.

Appearance

LED Indicator

Indicator State
ON
1 WAN signal
strength indication Blinking
OFF
Blue
2 Network mode
Red
indication
OFF
Description
Signal strength is very good or good
(RSSI >= -90dBm)
Signal strength is weak (-100dBm <
RSSI < -90dBm)
No signal
Registered to 3G network
Registered to 2G network
Not Registered
8
ON
3 WAN
connection Blinking
status indication
OFF
Off
4 Phone status
indication
On
Off
5 Phone status
Blinking
indication
On
Off
6 WiFi indication
Blinking
ON
7 Power
indication
OFF

Interface Description

1. Phone: Standard RJ11 connector for Telephone.
2. PSTN: Standard RJ11 connector for PSTN.
WAN connection established (PDP
activated)
WAN connection establishing (PDP
activating)
WAN connection not established
(PDP not activated)
PSTN not connected
PSTN connected or calling via PSTN
Local phone hang up
Phone picked up, ringing or network
CS registering
In calling.
WLAN shut down
WLAN working normally with data
transmission
External power supply works nor-
mally.
External power supply is discon-
nected or power off.
9