Operation Mode; Wan Connection; In Cable Broadband Mode; In 3G Gateway Mode - Zte MF29A User Manual

• System Information Area: Shows the system status and
different kinds of tips.

Operation Mode

When you first login to the web GUI, you need to choose the opera-
tion mode to make the correct setting.
There are three operation modes:
• Bridge: Connect to Internet by WAN interface.
• Cable Broadband: Connect to Internet by WAN interface.
• 3G Gateway: Connect to Internet by (U)SIM.
Please choose the correct operation mode according to your actual
network condition. For detailed information, please contact your net-
work operator. Click Apply to finish the setting.

WAN Connection

In Cable Broadband mode

Click WAN Connection, you can configure how to connect to the
Internet.
18
Select WAN mode as Static, DHCP or PPPoE. If you select PPPoE
mode, you need to input the User Name and Password supplied by
the network provider, and select the Connect mode.
• Auto Connect: The router will automatically connect to WAN
when it is powered on.
• Manual Connect: Connect to the Internet or disconnect from the
Internet manually.
Click Apply to confirm your configuration, and then the figure will
show in the wan connection status.

In 3G Gateway mode

Click WAN Connection, you can configure how to connect to the
Internet.
Click Dial Up, and then select the connection mode.
Auto Connect: The router will automatically connect to WAN
•
when it is powered on.
• Manual Connect: Connect to Internet or disconnect from
Internet manually.
19