Zte MF29A User Manual page 17

• Dest Port Range: Set the destination port numbers that will be
filtered
• Source Port Range: Set the source port numbers that will be
filtered.
• Action: Set how to handle the packet if it matches with the rule.
• Comment: Type comment for the filter settings.
Note:
Filtering rules are matched one by one, if met this provision, it will
not continue to match the rules listed below.
Click Apply to confirm your configuration.
Click Delete to delete the rule which you selected.
Click Reset to clear what you select or input.
To add a new rule:
1. Select Enable in the Basic Settings area.
2. Click Apply.
3. Input the detail information in the MAC/IP/Port Filtering area.
4. Click Apply in the MAC/IP/Port Filtering area.
URL Filtering
You can setup content filter to restrict the improper content access.
Select Settings > Firewall > URL Filtering, the URL Filtering is
shown in the following figure:
32
Type URL address, and then click Add to add the URL address into
the filtering list. The new URL filtering item will be shown in the Cur-
rent URL Filtering: field.
Port Forwarding
You can setup virtual servers to provide services on the Internet.
Select Settings > Firewall > Port Forwarding, the virtual server
settings is shown in the following figure:
If you select Enable, the Virtual Server Settings will appear:
• IP Address: Set IP address for the virtual server.
• Port Range: Set port numbers for the virtual server.
• Protocol: Set protocol for the virtual server.
• Comment: Type comment for the virtual server settings.
Click Apply to confirm your configuration.
33