Zte MF29A User Manual page 15

• Shot Slot: To indicate that 802.11g is using a shot time slot
because there is no legacy station(802.11b) present.
• Tx Burst: Tx burst allows router to deliver better throughput in
the same period and environment in order to increase speed.
• Pkt_Aggregate: Increase efficiency by aggregating multiple
application packets data into a single transmission frame. In this
way, 802.11n networks can send multiple data packets with the
fixed overhead cost in just a single frame.
Country/Area Code: Select the region you live in.
The Wi-Fi multimedia parameters are shown below:
• WMM Capable: When multimedia contents are transferred
over wireless network, this function enhances data transfer
performance.
• APSD Capable: Automatic Power Save Delivery (APSD),enable
or disable data flow using APSD during transmitting for power
saving.
Click Apply to confirm your configuration.
Security
Select Settings > Wi-Fi Setting > Security, the Security param-
eters are shown in the following figure:
Unless one of these encryption modes is selected, wireless trans-
missions to and from your wireless network can be easily intercept-
ed and interpreted by unauthorized users.
28
The security modes are described below:
• No ENCRYPTION: You can authenticate successfully with a
SSID, whether it is valid or empty.
• WPA-PSK/WPA2-PSK: Apply both the WPA-PSK and WPA2-
PSK scheme.
If the Authentication type is WPA-PSK/WPA2-PSK, the bottom part
of the configuration page displays WPA parameters.
• WPA Algorithm: TKIP, AES or AUTO.
• Pass phrase: You can input hexadecimal digits up to 64
characters or input ASCII characters choose a length of 63
characters or less.
• Key Renewal Interval: Define how long the key should be renew.
You can set Wireless MAC Filtering:
• Wireless Disable: If disabled, MAC address is not used to
control network access.
• Wireless Allow: Set the MAC address that is allowed to access
network.
• Wireless Reject: Set the MAC address that is not allowed to
access network.
Click Apply to confirm your configuration.
WPS
Select Settings > Wi-Fi Setting > WPS, the WPS configuration is
shown in the following figure:
29