Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MeiTrack MT80
Summary of Contents for MeiTrack MT80
- Page 1 Personal Tracker User Manual V1.1 MT80...
-
Page 2: Table Of Contents
Contents 1.Product Overview ........................ - 3 - 2.MT80 Characteristics ......................- 3 - 3.For Your Safety ........................- 4 - 4.Getting Started ........................- 5 - 4.1 Tracker and Accessories ....................- 5 - 4.2 View ......................... - 5 - 4.3 Functional Parts ...................... -
Page 3: Product Overview
The MT80 is a very small, light-weight, quality tracking device specially designed for lone workers, children, personal safety, car security or even pets. Through GPS and GSM or GPRS communications, MT80 can get its position and send the position data back to your mobile phone or server to be displayed on maps. -
Page 4: For Your Safety
3.For Your Safety Read these simple guidelines. Not following them may be dangerous or illegal. Switch on safely Do not switch on MT80 when wireless phone use is prohibited or when it may cause interference or danger. Switch off in hospitals Follow any restrictions. -
Page 5: Getting Started
Follow any restrictions. Do not use MT80 when blasting is in progress. Qualified service Only qualified personnel can repair MT80. Water resistance MT80 is not fully water resistant. Keep it dry. Use waterproof bag if necessary. 4.Getting Started This section will describe how to set up your MT80. -
Page 6: Functional Parts
Buttons Power On/Off Button To turn on/off MT80 SOS Button When it is pressed, MT80 will send its position data back to the authorized phone number or server Other Connectors Mini USB Used for charging, firmware update, configuration on PC and exporting stored data. -
Page 7: Change Password
Once the tracker has a GPS fix it will start to flash blue (0.1 second on and 2.9 seconds off). Check that if Green LED is also flashing (0.1 second on and 2.9 seconds off) which means it has GSM connection 6.Change Password Command: ****PXXXX Description: Send this SMS command to change user’s password... -
Page 8: Track
Track on Demand - Reply with a Google Map link Command: ****H Description: Send this command to MT80 then you receive an SMS with an http link. Click on the link then the location can be shown directly on Google Map. Note: Only smart phones and PDA support this function. -
Page 9: Track By Calling
Command Response View 8.2Track by Calling Command: ****RX Description: Enable the tracker to report its longitude and latitude or Google Map link by SMS after a missed call is made to the tracker. Note: X=0, turn off this function X=1, SMS in normal format X=2, SMS in Google Map format Example: Command... -
Page 10: Track By Preset Interval
8.3Track by Preset Interval Command: ****AX Description: Sets an interval for the tracker to continuously return its location by SMS Note: X is the interval in minute with range [0, 999]. If X=0 it will stop tracking by interval) Example: Command Response The tracker will report its location by SMS every 60 minutes. -
Page 11: Track By Ms01
Or you can use local map software on PDA or car navigation device to input the coordinates. 8.5 Track by MS01 If you have bought our GPS Tracking Software MS01, after proper configuration, you can do tracking on MS01. GPS Tracking System - MS01 Please refer to MS01 User Guide for more information. -
Page 12: Track By Gpsgate
0000G220.121.7.89,8500,CMNET, , ,1,60 [without APN user name and password] Command Response So the GPRS tracking interval is 600 seconds (10 minutes). For more information regarding GPRS tracking please refer to <MT80 GPRS Communication Protocol> 8.7Track by GpsGate The MT80 supports GpsGate Software. -
Page 13: Movement And Geo-Fence
10.Movement and Geo-fence 10.1 Movement Alarm Command: ****MX Description: Send this command to set movement alarm. When MT80 moves out of a preset square scope, it will send an SMS alarm to the authorized phone number for SOS button. Note:... -
Page 14: Listen (Voice Wiretapping)
8. Only one alarm can be set in either Movement Alarm or Geo-fence Alarm; Example: Command Response MT80 will send out SMS once it moves out the scope of 11404.0000,E,2232.0010,N,11505.1234,E, 2333.5678,N 11.Listen (Voice Wiretapping) Command: ****WX Description: Authorize a phone number to make a silence call to the tracker, the track answers the call automatically and allows the caller to listen to what happens around the tracker. -
Page 15: Power Down
Command Response When you use 13888888888 to call MT80, it will answer the phone automatically and then you can hear what is happening around the tracker holder. 12.Power Down Command: ****FX Description: Make the tracker into power down mode when it is inactive for a period of time. In Power Down states, GPS stops working and GSM enters sleep and stop sending out message until it is activated by message, incoming calls or triggered by buttons. -
Page 16: Auto Log When No Gprs
The interval memory can store up to 1500 SMS and 4600 GPRS message. 14.Initialization Command: default Description: This is to make all settings back to factory default. Note: When MT80 is on, send ‘default’ to the tracker to make all settings back to factory default Example: - 16 -... -
Page 17: Parameter Editor
Response 15.Parameter Editor The tracker can be configured by computer using the Parameter Editor instead of sending SMS commands. MT80 Parameter Editor Please refer to <MT80 Parameter Editor> for more information. 17.Troubleshooting Problem: Tracker will not turn on Possible Cause:... -
Page 18: Contacts
GPRS function of MT80 is turned off Turn on GPRS function of MT80. Incorrect IP address or PORT Get the right IP address and PORT and reset to MT80. GSM signal is weak Move the unit to a location with good GSM reception.