Table of Contents
Advertisement
13. "speed short cut key"
Directly sets speed value.
14. "incline short cut key"
Directly sets incline value.
15. Incline window
Displays current window
16. Time, distance, calorie and heart rate window
Shows time, distance, calories and heart rate
3. Unload Operating
Insert power plug into the socket with earth wire, turn the switch to "1" position which is on the frame.
1)
Put the safe key in the right position, when circuit is on, press "on/off", keep it running in unload
2)
condition. Do not run on the belt at this time .Test the condition of running belt (testing from low speed
to high ones), after testing, press "on/off".
3)
If everything is ok, press start and begin your workout.
4. Meter Operating Instructions
Insert power plug into the socket with earth wire, turn the switch to "1" position which is on the frame.
1)
Place the safe key to the appointed position. After a few seconds, panel will show that the machine is
ready.
2)
Nip another end of safe key to your clothes, and stand on the footplate on both sides.
Press "on/off" key, running belt moves at the lowest speed (1.0km/h). Speed windows will display your
3)
running speed.
4)
Start to run.
5)
Press speed key or incline key to adjust speed and incline, speed window and incline window will
display your speed and incline.
To end your exercise in a safe way, please first press "on/off" key to close the treadmill. Please leave
6)
the running belt until it stops slowly. Turn off the power.
CONTROL
13
Advertisement
Table of Contents
