Table of Contents
Advertisement
Extended Settings and Functions
7.7
Automatic Standby Function
1. Select in the menu System Setup the submenu Other and press OK.
2. Select Auto Standby to switch on or switch off the automatic standby
function, using the keys
On
Standby
).
7.8 Display Setting
Select in the menu Tools the submenu DisplaySetting and press OK to
edit various display settings:
Select Brightness to change the brightness value from 0 to 100 (de-
fault value is 50) by using the keys
Select Contrast to change the contrast value from 0 to 100 (default
value is 50) by using the keys
Select Saturation to change the saturation value from 0 to 100 (default
value is 50) by using the keys
Select Hue to change the hue value from 0 to 100 (default value is 50)
by using the keys
Select Sharpness to change the sharpness value from 0 to 10 (default
value is 5) by using the keys
52
Based on current EC regulations, this receiver is
equipped with an energy saving system. After three
hours, the receiver will automatically switch to energy
save mode (energy consumption of less than 1 W) un-
less a function is triggered via remote control during
such period (e.g. volume change or switching of chan-
nels). You can deactivate the automatic standby func-
tion via the menu.
and
and
(factory setting is Auto
and
and
.
and
.
.
and
.
.
smart CX72
Advertisement
Table of Contents
