Table of Contents
Advertisement
When the ActiTrainer is plugged into a USB port, shows blinking USB and battery symbol. The battery symbol will
stop blinking when the unit is fully charged.
When turning Lifestyle mode off (disabling the display), the ActiGraph logo will appear for 10 seconds. After this
time, the display will go blank until another button is pressed.
The ActiTrainer is shipped in a halted state. This is indicated by a HALT sign in the middle of the display. This
can be seen by pressing any button. This symbol also appears when the battery is discharged completely, when the
unit resets or when the memory is full. At this point, the unit MUST be reinitialized. If a "D" appears under the
HALT symbol, data is present on the unit and can be uploaded to the Virtual Trainer prior to reinitialization.
45
Advertisement
Table of Contents
