Table of Contents
Advertisement
2) Select "Start Cal" from the Calibrate menu
3) Select "Walk" or "Run" as the calibration type depending on which calibration will be performed
4) Select where you will be wearing the ActiTrainer during the walk calibration. It is recommended that you
calibrate the ActiTrainer for use wherever is it worn the most (on the hip or upper arm)
Begin walking or running immediately. You must walk or run for at least 1 minute! When finished with the
exercise, stop the calibration immediately by pressing any button and choosing "yes" when prompted to stop the
workout. Users must run or walk for at least 1 minute for a valid calibration.
Stopping a Calibration
Stopping a calibration is the same as
prompting the user to stop the workout is revealed.
Choosing "Yes" stops the calibration. Choosing "No" returns to the previous screen. Choosing "Menu" presents
the user with
display options for the
Calibrations should be terminated as soon as a run or walk is over to prevent inaccuracies in future distance estimations.
Clearing a Calibration Workout
After performing a calibration walk or run, users have the option to clear out the calibrated run prior to connecting
the ActiTrainer to a PC and completing the calibration process. This is handy if the user decides they are not happy
with their run or walk. Also, this action clears out the "ERR" symbol on the main screen which remains visible
when there was a problem during calibration. Any previous completed calibration data remains resident with the
ActiTrainer.
stopping a
workout. Press any button during the calibration. A menu
workout.
*IMPORTANT*
Users must walk or run for at least 1 minute.
21
Advertisement
Table of Contents
