Table of Contents
Advertisement
Figure 19 - ActiTrainer client completing calibration
Once this information is entered and the user continues, the ActiTrainer itself is calibrated. All subsequent data
uploads will comply with this calibration and the distance/pace displayed on the ActiTrainer display will yield a
higher accuracy. Calibrating the device is not retroactive. That is, data that has been previously uploaded to the
Virtual Trainer will not be affected by a calibration. Also if calibrations occur in the future, the data since the
preceding calibration will remain unaffected.
If only a walk calibration or run calibration is performed (not both), only the relevant distance will be available to
enter on the client calibration screen. The uncalibrated technique will be populated with "N/A". As noted in the
previous section, it is not necessary to perform calibration for both a run and a walk. Users are free to choose
which calibrations they perform and when they are performed.
24
Advertisement
Table of Contents
