Table of Contents
Advertisement
Figure 14 – Adding a New User
Initializing the ActiTrainer
Once a new user has been created and saved, the ActiTrainer can be initialized. Initialization should occur only
when the device in use has never been initialized, if the battery dies during use or if a user chooses to allow another
person in his account use his device with their parameters.
To initialize the ActiTrainer, plug the unit into the PC's USB 1.1 or 2.0 port (if this has not been done already).
You may be prompted to complete the Windows driver initialization process. If so, see "Software" above. Upon
detecting the unit, the ActiTrainer software will indicate so with a green light in the lower left-hand corner. Press
the "Initialize Device" button to begin initialization. A warning message will appear indicating that any data that is
currently on the device will be deleted. The ActiTrainer client will inform you when the unit has been successfully
initialized. Remove the device from the USB port and replace the USB cap. Typically, the display on the unit will
indicate a countdown timer. Once this timer expires, the unit will begin collecting activity data in Lifestyle mode.
Initializing the device completes the activation of your account and starts your free trial to Virtual Trainer. At the
end of the trial, you will be forced to select a subscription package. Subscription package pricing can be found
online at http://www.actitrainer.com/default.asp?Movie=Subscriptions.swf. You are allowed unlimited users
during the trial period.
Congratulations! Your ActiTrainer is now ready for use!
Deleting Users
To remove users from your account, select the user that you would like to delete and press the delete button. You
must confirm this action. Doing so removes the user from your account completely and all data associated
12
Advertisement
Table of Contents
