Table of Contents
Advertisement
After the ActiTrainer Client application has finished installing, plug in your ActiTrainer into an available USB port. The Found New
Hardware Wizard will then pop up. Select "no, not at this time" and click Next. On the next screen, select "install the software
automatically" and click Next. During the installation, you will see the "Continue Anyway" screen.
*The ActiTrainer drivers install to the specific port that you originally use.
Therefore, you may need to reinstall the drivers in order to use a different port.
*Immediately following the completion of this installation, a second driver will begin
to install. Follow the same instructions as Step 4 to continue.
Using the Software
Registering a New Account
Open the ActiTrainer Console by navigating to it under "All
Programs" in the START bar. At the log in window, select
"Register for an account". Your default web browser will open to
the appropriate page for registering for an account. Complete all
required fields and submit the registration form.
Software Outline
Figure 12 below describes the various areas of the ActiTrainer software.
In order to use the ActiTrainer software or register for an account, an active internet connection is required. The
3
connection is required in all remaining steps of this section
Figure 11 – Confirm Installation of Unsigned Driver
*IMPORTANT*
3
10
Figure 12 – Login Screen for ActiTrainer Client Software
Advertisement
Table of Contents
