Maintenance And Prevention - Quanmax HPC-1000 User Manual

1. To install the VGA driver, please double-click "Setup.exe" which is under below
folder. \Intel VGA\Utilities
2. If your system goes into suspend mode, please push the power button for 2
seconds to wake up the system.

Maintenance and Prevention

Your HPC-1000 system requires minimal maintenance and care to keep it operating
correctly.
Occasionally wipe the system with a soft dry cloth.
You should only remove persistent dirt by use of a soft, slightly damp cloth (use
only a mild detergent).
Make sure the ventilation holes are clear of debris.
Do NOT do any of the following:
Allow water to enter the computer
Use a heavily dampened cloth
Spray water directly inside of computer
HPC-1000 User's Manual
NOTE
CAUTION
23
Chapter 2