Operating System And Drivers; Maintenance And Prevention - Quanmax HPC-1050 User Manual

Operating System and Drivers

If your product does not come with an operating system pre-installed, you will need
to install an operating system and the necessary drivers to operate it. After you have
finished assembling your system and connected the appropriate power source,
power it up using the power supply and install the desired operating system.
For other operating systems, please contact us.
1. To install the VGA driver, please double-click "Setup.exe" which is under below
folder. \Intel VGA\Utilities
2. If your system goes into suspend mode, please push the power button for 2
seconds to wake up the system.

Maintenance and Prevention

Your HPC-1050 system requires minimal maintenance and care to keep it operating
correctly.
Occasionally wipe the system with a soft dry cloth.
You should only remove persistent dirt by use of a soft, slightly damp cloth (use
only a mild detergent).
Make sure the ventilation holes are clear of debris.
Do NOT do any of the following:
Allow water to enter the computer
Use a heavily dampened cloth
Spray water directly inside of computer
HPC-1050/1051 User's Manual
NOTE
CAUTION
22
Chapter 2