Table of Contents
Advertisement
Notice:
・ Do not use a universal joint with a socket extension. Using a universal joint may
cause the socket extension to drop and create a short circuit.
・ Insulate the disconnected terminal with insulating tape.
f)
Close the terminal cover.
Notice:
Make sure that the terminal cover is closed securely.
g)
Install the 2 battery clamps or ropes to
the HV battery module (for RH side).
h)
Remove the HV battery module (for RH
side).
29. The HV battery pack is recyclable. Contact your Toyota distributor (if included on the HV
battery caution label) or contact the nearest Toyota dealer (see next page for samples of
the HV battery caution label).
Caution:
After removing the HV battery, do not reinstall the service plug grip to the HV
battery.
38
Advertisement
Table of Contents
