(1) Remove the HV battery module (for LH side).
a)
Disconnect the No. 2 hybrid vehicle
battery pack cable connector.
Notice:
Insulate the disconnected connectors with
insulating tape.
b)
Open the terminal cover.
c)
Using an insulated tool, remove the nut
and disconnect the electric vehicle
battery plug assembly cable from the HV
battery module (for LH side).
Notice:
・ Do not use a universal joint with a
socket extension. Using a universal joint
may cause the socket extension to drop and create a short circuit.
・ Insulate the disconnected terminal with insulating tape.
d)
Close the terminal cover.
Notice:
Make sure that the terminal cover is closed securely.
e)
Open the terminal cover.
f)
Using an insulated tool, remove the nut
and disconnect the HV battery module
(for center) cable from the HV battery
module (for LH side).
Notice:
・ Do not use a universal joint with a
socket extension. Using a universal joint
may cause the socket extension to drop and create a short circuit.
・ Insulate the disconnected terminal with insulating tape.
g)
Close the terminal cover.
Notice:
Make sure that the terminal cover is closed securely.
35