Table of Contents
Advertisement
(6) Remove the 25 bolts, 6 nuts and upper hybrid vehicle battery cover sub-assembly.
27. REMOVE BATTERY VOLTAGE SENSOR
CONNECTOR
Caution:
Be sure to wear insulated gloves and
protective goggles.
(1) Disconnect the 3 battery voltage sensor
connectors.
Notice:
Insulate the disconnected high voltage connectors with insulating tape.
28. REMOVE HV BATTERY
Caution:
Be sure to wear insulated gloves and protective goggles.
Notice:
・ To prevent the wire harness from being caught, make sure to bundle the wire
harness using insulating tape or equivalent.
・ Use cardboard or other similar material to protect the HV battery module from
damage.
・ When removing an HV battery module from the vehicle, do not allow it to contact
the vehicle.
・ When removing/moving an HV battery module, make sure not to tilt it more than
80°.
・ When moving an HV battery module, make sure to use an engine lifter.
・ Insulate the disconnected terminals or connectors with insulating tape.
34
Advertisement
Table of Contents
