Table of Contents
Advertisement
(9)
Disengage the 6 claws, 2 clips and 2 guides to
remove the rear door scuff plate LH.
(10)
Remove the rear seat headrest assembly.
(11)
Disconnect the connector (w/ seat heater
system).
(12)
Remove the 3 bolts on the rear side of the rear
No. 1 seat assembly.
(13)
Remove the 2 bolts on the front side of the rear
No. 1 seat assembly.
(14)
Remove the rear No. 1 seat assembly.
15. REMOVE REAR NO. 1 SEAT ASSEMBLY
(for 60/40 Split Seat Type RH Side)
(1) Disengage the 2 guides and 2 claws to remove
the front outer seat track bracket cover as
shown in the illustration.
(2) Remove the front inner seat track bracket
cover.
Hint:
Use the same procedure as for the front outer
seat track bracket cover.
25
Advertisement
Table of Contents
