Toyota 2014 HIGHLANDER GVU58 Series Dismantling Manual page 40

h)
Disconnect the HV battery module (for
LH side) cable connector.
Notice:
Insulate the disconnected connectors with
insulating tape.
i)
Install the 2 battery clamps or ropes to
the HV battery module (for LH side).
j)
Remove the HV battery module (for LH
side).
(2) Remove the HV battery module (for center).
a)
Disengage the 2 clamps.
b)
Disconnect the No. 2 hybrid battery pack
wire connector.
c)
Disengage the clamp.
d)
Disconnect the hybrid battery junction
block assembly connector.
Notice:
Insulate the disconnected connectors with
insulating tape.
36