(12) Remove the 3 bolts on the rear side of the rear
No. 2 seat assembly.
(13) Remove the rear No. 2 seat assembly.
17. REMOVE AIR INTAKE COVER
Hint:
・ Use the same procedure as for the center and
RH side.
・ The following procedure is for the LH side.
(1) Using a screwdriver, disengage the 2 claws and
open the 2 hole covers.
(2) Remove the 2 screws.
(3) Disengage the 2 claws and remove the air
intake cover.
18. SEPARATE FRONT FLOOR CARPET ASSEMBLY
(1) Turn back the front floor carpet assembly.
19. REMOVE NO. 1 FLOOR BOARD
(1) Remove the No. 1 floor board.
30