Table of Contents
Advertisement
4. REMOVE AUXILIARY BATTERY
(1) Open the auxiliary battery terminal cap.
(2) Loosen the nut and disconnect the cable from
the positive (+) auxiliary battery terminal.
(3) Remove the nut and bolt.
(4) Remove the battery clamp sub-assembly from
the auxiliary battery.
(5) Disconnect the battery hose from the auxiliary
battery.
(6) Remove the auxiliary battery.
(7) Remove the battery insulator from the
auxiliary battery.
5. REMOVE SERVICE PLUG GRIP
Caution:
・ Wear insulated gloves.
・ Remove the service plug grip to interrupt the high voltage circuit.
・ Keep the removed service plug grip in your pocket to prevent other staff from
accidentally reinstalling it while you are dismantling the vehicle.
・ All the high voltage wiring connectors are orange.
・ After removing the service plug grip, do not touch the high voltage connectors
or terminals for 10 minutes.
Hint:
Waiting for at least 10 minutes is required to discharge the high voltage capacitor inside the
inverter with converter assembly.
20
Advertisement
Table of Contents
