Toyota 2014 HIGHLANDER GVU58 Series Dismantling Manual page 20

3. Remove the service plug grip.
Caution:
・ Wear insulated gloves.
・ Remove the service plug grip to interrupt the high voltage circuit.
・ Keep the removed service plug grip in your pocket to prevent other staff from
accidentally reinstalling it while you are dismantling the vehicle.
・ All the high voltage wiring connectors are orange.
・ After removing the service plug grip, do not touch the high voltage connectors
or terminals for 10 minutes.
Hint:
Waiting for at least 10 minutes is required to discharge the high voltage capacitor inside the
inverter with converter assembly.
(1) Wear insulated gloves and remove the service plug grip after sliding the lever of the service
plug grip as shown in the illustration.
4. Make other staff aware that a high-voltage system is being dismantled by using the
following sign: CAUTION: HIGH-VOLTAGE. DO NOT TOUCH. (see page 18).
5. If the service plug grip cannot be removed due
to damage to the vehicle, remove the
IG2-MAIN fuse (25A).
Caution:
This operation shuts off the HV system. Be
sure to wear insulated gloves because high
voltage is not shut off inside the HV battery.
When it is possible to remove the service
plug grip, remove it and continue the
procedure.
16