e)
Disconnect the HV battery module (for
RH side) cable connector.
Notice:
Insulate the disconnected connectors with
insulating tape.
f)
Disengage the clamp.
g)
Install the 2 battery clamps or ropes to
the HV battery module (for center).
h)
Remove the HV battery module (for
center).
(3) Remove the HV battery module (for RH side).
a)
Disconnect the HV battery module (for
RH side) cable connector.
b)
Disengage the clamp.
c)
Disconnect the hybrid battery junction
block assembly connector.
Notice:
Insulate the disconnected connectors with
insulating tape.
d)
Open the terminal cover.
e)
Using an insulated tool, remove the nut
and disconnect the No. 2 hybrid vehicle
battery pack cable from the HV battery
module (for RH side).
37