Appendix B System Specifi Cations - Supero SuperServer 2026TT-DLRF User Manual

Superserver
Table of Contents

Advertisement

Appendix C: System Specifi cations
Appendix B
System Specifi cations
Note: unless noted specifi cations apply to a complete system (two serverboards).
Processors
Four Intel® 5600/5500 Series processors in LGA1366 sockets
Note: Please refer to our website for details on supported processors.
Chipset
Intel 5520/ICH10R
BIOS
32 Mb AMI SPI Flash ROM (each serverboard)
Memory Capacity (each Serverboard)
Twelve DIMM sockets that can support up to 192 GB of registered ECC or 48
GB of unbuffered ECC/Non-ECC DDR3-1333/1066/800 SDRAM
Note: Refer to Section 5-6 for details.
SAS Controller
LSI 2108 controller on daughter card for 6 Gb/s SAS drives (IT mode)
SATA Controller
SAS controller on daughter card to support six 3 Gb/s Serial ATA (IT mode)
SAS/SATA Drive Bays
Twenty four hot-swap drive bays to house 2.5" hard drives (twelve per node)
PCI Expansion
Four PCI Express x8 add-on cards (with pre-installed RSC-R2UT-2E8R riser
cards)
B-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 2026tt-dlibqrfSuperserver 2026tt-dlibxrf

Table of Contents