Table of Contents
Advertisement
InstallatIon InstructIons - gas
stability bracket
stability bracket
If the cooker is fitted with a flexible
If the cooker is fitted with a flexible
connection, a stability bracket should be
connection, a stability bracket should be
fitted to engage in the back of the cooker.
fitted to engage in the back of the cooker.
A stability bracket can be bought from
A stability bracket can be bought from
your local supplier.
your local supplier.
A stability bracket can be fitted as follows:
A stability bracket can be fitted as follows:
1. Place the cooker in position and draw
1. Place the cooker in position and draw
a PENCIL LINE level with the front
a PENCIL LINE level with the front edge.
2. Mark the centre of the cooker to give
2. Mark the centre of the cooker to give
the CENTRE LINE for the bracket.
the CENTRE LINE for the bracket.
3. Remove the cooker and mark off
3. Remove the cooker and mark off
450mm from the PENCIL LINE to locate
450mm from the PENCIL LINE to locate
the front edge of the lower bracket.
the front edge of the lower bracket.
InstallatIon InstructIons
4. Fix the bracket to the floor.
4. Fix the bracket to the floor.
Measure from FLOOR LEVEL to
Measure from FLOOR LEVEL to
ENGAGEMENT EDGE in the back of the
ENGAGEMENT EDGE in the back of the
cooker and add 3mm.
cooker and add 3mm.
5. Assemble the underside of the top part
5. Assemble the underside of the top part
of the bracket to this height.
of the bracket to this height.
levelling
levelling
Place a spirit level on a baking sheet onto
Place a spirit level on a baking sheet onto
edge.
an oven shelf.
an oven shelf.
The cooker is fitted with levelling feet at
The cooker is fitted with levelling feet at
the front and rear.
the front and rear.
3
Advertisement
Table of Contents
