Table of Contents
Advertisement
ReMOVing OVen PaRTS FOR cleaning
inner Door glass
• The inner door glass panel can be
removed for cleaning but it must be
replaced the right way up. If there is any
REMOVING OVEN PARTS FOR CLEANING
writing on the glass, you must be able to
read it clearly when the cavity doors are
Inner Door Glass
open.
• Always make sure that the glass is
The inner door glass panel can be removed for cleaning
•
pushed fully into the Stop position.
but it must be replaced the right way up. If there is any
writing on the glass, you must be able to read it clearly
• To remove the glass panel, open the
when the cavity doors are open.
door wide, hold the top and bottom edges
Always make sure that the glass is pushed fully into the
and slide out.
•
Stop position.
• Warning: DO nOT operate the appliance
To remove the glass panel, open the door wide, hold the
•
without the glass panel correctly fitted.
top and bottom edges and slide out.
Warning: DO NOT operate the appliance without the
• For your safety, glass door panels are
•
glass panel correctly fitted.
made of toughened glass. This ensures
For your safety, glass door panels are made of toughened
that, in the unlikely event that a panel
•
glass. This ensures that, in the unlikely event that a panel
breaks, it does so into small fragments to
breaks, it does so into small fragments to minimise the
minimise the risk of injury. Please take care
risk of injury. Please take care when handling, using or
when handling, using or cleaning all glass
cleaning all glass panels, as any damage to the surfaces
panels, as any damage to the surfaces
or edges may result in the glass breaking without warning
or edges may result in the glass breaking
or apparent cause at a later date. Should any glass panel
without warning or apparent cause at
be damaged, we strongly recommend that it is replaced
a later date. Should any glass panel be
immediately.
damaged, we strongly recommend that it
is replaced immediately.
Shelf Runners
Shelf Runners
• Shelf runners can be removed to
Shelf runners can be removed to enable you to clean then
enable you to clean then thoroughly.
•
thoroughly. Make sure they are cool to touch and then
Make sure they are cool to touch and then
grasp the runners and slide out of their
grasp the runners and slide out of their hanging holes.
hanging holes.
cleaning
gaS HOB
Burner caps and heads
• The slots in the burner head where the
flames burn should be cleared of deposits.
• Clean with a nylon brush, rinse and
GAS HOB
then dry thoroughly. There may be brown
coloured markings on your burners; these
are carbon deposits or fat stains and can
The slots in the burner head where the flames burn
•
be removed using a soap filled pad.
should be cleared of deposits.
Clean with a nylon brush, rinse and then dry thoroug
•
• Do not put burners in the dishwasher
There may be brown coloured markings on your bur
or soak them. Using dishwasher powders,
these are carbon deposits or fat stains and can be
washing up liquids and caustic pastes can
removed using a soap filled pad.
damage the burners.
Do not put burners in the dishwasher or soak them.
•
• Burner caps and heads must be
dishwasher powders, washing up liquids and caustic
repositioned correctly so that they sit
pastes can damage the burners.
squarely on to the hob as shown. This is
Burner caps and heads must be repositioned correct
•
particularly important with stainless steel
that they sit squarely on to the hob as shown. This i
models as failure to reposition the caps
particularly important with stainless steel models as
correctly may result in discolouration of
to reposition the caps correctly may result in
the stainless steel around the burners.
discolouration of the stainless steel around the burne
CLEANING
Burner caps and heads
Advertisement
Table of Contents
