LED Status Lights
Rear View
Figure 3—Rear view of the 7811
5
Table 2
describes the physical features of the AP's rear panel.
Label
5
6
7
8
8
6
7
Table 2—Rear Panel Features
Description
AC Power (Input 100-120V or 220-240V depending on the
country, 50/60HZ, 0.3A)
WAN port, a 10/100Mbps auto-sensing, autonegotiating
Ethernet port that needs to be connected to the broadband
gateway.
Over the Air Auto Provisioning Button (not active for current
release).
Reset button. Used only if you need to reset the 7811 to its
factory default settings. Insert the end of a paper clip or pin
into the hole and hold it in for at least 8 seconds.
Ruckus Wireless MediaFlex 7811 Access Point
8