To Place A Call On Exclusive Hold; To Transfer A Call - NEC NEAX7400 ICS M110e User Manual

TO PLACE A CALL ON EXCLUSIVE HOLD

Press Hold twice. Line appearance
indicates interrupted wink.
NOTE: If held line appears on other D
stations, LED remains steadily lit red.
TO RETRIEVE
Lift handset or press Speaker.
Press held line. Use handset to converse.
term ®
NOTE: Only D that set Exclusive Hold option can retrieve the call.
IF UNANSWERED
After preprogrammed time, Automatic Recall is initiated.
Visual and audible signal (rapid flash and ring burst) is sent to station
which placed call on Exclusive Hold. Recall shows as a flashing green
LED on your phone, and solid red on other phones with same line.
NOTE: Exclusive Hold excludes any other phone from picking up your held call. Exclusive Hold shows
as a flashing green LED on your phone. The same line on other phones appears as a solid red LED.

TO TRANSFER A CALL

After conversing, ask party to hold.
Press Transfer. Receive
interrupted dial tone.
Dial destination station's extension,
hang up or wait for answer.
NOTE: "TRANSFER" is only displayed when "TAPI" mode is enabled for your extension.
term
®
14
Hold station
number
EHOLD 2001
(Time Display)
(Time Display)
Transferred station
or trunk number
TRANSFER 2001
(Time Display)